Request a quote
Surface treatment line manufactured by Industrias Goini

Álava · since 1980

We build the installation. We test it. And only then do we hand it over to you.

Turnkey engineering and manufacturing of surface treatment lines, industrial wastewater treatment plants and gas treatment systems.

Since 1980Building installations
+200Installations delivered
+6Countries: Spain, Mexico, Brazil…
100%Tested before it leaves
  • Acid zinc plating
  • Alkaline zinc plating
  • Nickel-chrome
  • Anodising
  • Phosphating
  • Penetrant testing
  • Ion exchange
  • Reverse osmosis
  • Metal recovery
  • Gas scrubbing
  • PLC automation
  • PVDF · PP · PVC · Stainless steel

What we build

Three disciplines under one roof

The line, the water it generates and the fumes it gives off: handled by a single manufacturer, with one engineering team behind it and one point of contact.

01 Automatic electroplating line built by Goini, seen from above with its red carriers

Electroplating and surface treatment

Turnkey electroplating lines — automatic, semi-automatic or manual; rack and barrel — designed for your part, your throughput and your building.

  • Acid and alkaline zinc plating
  • Decorative and hard nickel-chrome
  • Anodising and phosphating
  • Blackening and electroless nickel
  • Penetrant testing (aerospace)
  • Tanks in PVDF · PP · PVC · Stainless steel

See surface treatment in depth

02 Large-capacity wastewater treatment plant with its tanks and walkways, built by Goini

Industrial wastewater treatment

Physico-chemical plants, continuous or batch, designed to meet your discharge permit. We recover water instead of sending it down the drain.

  • Continuous treatment
  • Batch treatment
  • Ion exchange
  • Lamella clarifier
  • Sludge thickener
  • Reverse osmosis

See water treatment in depth

03 Vertical fume scrubber tower with its fan, built by Goini

Gas treatment

Extraction and scrubbing of the fumes from your tanks: clean air for your workforce and emissions within limits for the environment.

  • Acid-alkaline fumes
  • Chromic fumes
  • Cyanide fumes
  • Vertical tower or horizontal scrubber
  • High chemical resistance
  • Low pressure drop

See gas treatment in depth

04 Reverse osmosis unit on a skid, with pump, reagent tanks and control panel, manufactured by Goini

Water generation

Treating what goes out is not everything: we also produce the water that comes in. Demineralised water by reverse osmosis, by ion exchange or by both, depending on the quality of the feed water and what your process requires.

  • Reverse osmosis
  • Ion exchange with resins
  • Automatic regeneration
  • Sand and activated carbon filtration
  • No aggressive reagents
  • Integrated into your line

See water generation

Experience

The main processes in our lines

More than 200 projects, between surface treatment lines and wastewater treatment plants, since 1993. If your process or your sector is on this list, we have solved it before.

Degreasing
Nickel plating
Chrome plating: decorative and hard
Blackening
Electroless nickel
Zinc plating: acid, alkaline and zinc-nickel
Passivation
Anodising: hard, soft, TSA and sulphuric-boric
Pickling: stainless steel, titanium and iron
Penetrant inspection
Phosphating
Tin plating
Brass plating
Lacquering

The main sectors our lines serve

Automotive
Aerospace
Locks and ironmongery
Taps, fittings and sanitaryware
Machining and metal structures
Bolts and fasteners
Electrical
Construction
Shipbuilding

Our guarantee

Everything is assembled and tested in Álava before it leaves

We don't ship boxes of parts: we ship an installation that has already run. We assemble it complete at our plant, run it with you watching, and only then does it travel to yours.

01

Manufacturing and testing

Complete construction and functional testing at our plant.

02

Dismantling

Careful dismantling and marking of every component.

03

Transport

To your site, in Spain or any other country.

04

Assembly and start-up

Final assembly and commissioning at your plant.

05

Training

Your team learns to operate and maintain the installation.

About us

In-house engineering since 1980, on two continents

Since 1980 in Álava: a technical office with mechanical, electrical-PLC and chemical departments and its own laboratory, and a workshop that builds what the office designs. Nothing essential is subcontracted — which is why we can answer for the entire installation.

Get to know the company

Front of the Industrias Goini plant in the Goiain industrial estate (Álava)
Manufacturing since1980

Engineering and mechanical design

The line configuration according to your needs, and the exact CAD design of every element that makes it up.

Electrical and PLC programming

From the simplest automation to the most sophisticated: parameter control, data logging and remote assistance.

Chemistry with laboratory

Design of effluent treatment and gas treatment processes, with our own laboratory.

The workshop

Plastic fabrication, metal fabrication, machining and pre-assembly: the means to build and assemble; and an after-sales service that knows your installation because it built it.

Eurogoini · Guadalajara, Mexico

Our own presence across the Atlantic

Eurogoini is our subsidiary in Guadalajara (Mexico) since 2007. We have delivered in Mexico since 1997 and the total is now more than 50 projects: surface treatment lines, wastewater treatment plants, fume scrubbers, plastic fabrication, spare parts and maintenance. For our customers in the Americas, a nearby point of contact with Álava's engineering behind it.

Eurogoini on the mapGuadalajara, Jalisco · opens Google Maps Eurogoini websiteeurogoini.com · opens in a new tab

Subsidiary since
2007
Mexico
+50 projects completed

Real cases

Installations already in production

More than 200 lines and treatment plants delivered since 1993 in more than six countries: Spain, Mexico, Brazil, France…

Automatic line with its blue structure, walkways and yellow stairs, installed in a customer's building

Automatic lines, installed and in production

Raised structure with walkways, process tanks and automatic transport: this is how a Goini line looks once installed in the customer's building.

80 %automatic lines
20 %semi-automatic lines
Continuous physico-chemical treatment plant with its control panel, assembled in the Goini workshop

Treatment plants sized to the flow

Continuous or batch physico-chemical plants, sized for each effluent: from 200 litres a day up to 28,500 litres an hour.

70 %continuous
30 %batch
Cleaning and penetrant inspection line for aerospace parts, manufactured by Goini

Aerospace: cleaning and penetrant testing

Cleaning and penetrant inspection lines for aerospace parts, manual and automatic.

+15lines delivered
2008the first

No-obligation quote

Let's talk about your next installation

Send us your process data — parts and throughput, flow rate and effluent analysis, or the fumes to be treated — and our technical office will prepare a turnkey proposal for you.

Request a quote or call: +34 945 465 470

Contact

Tell us about your project

Fill in the form or call us directly. You will hear back from someone in the technical office, not a salesperson on duty.

Controller: Industrias Goini, S.L. · Purpose: to answer your enquiry and, if you request it, prepare a quote · Legal basis: your consent · Recipients: none, except the providers that host the website and deliver the email · Rights: access, rectification, erasure and the others explained in the privacy policy.

Industrias Goini, S.L.

Address
C/ San Bartolomé, 5
Polígono Industrial Goiain
01170 Legutio (Álava), Spain
Opening hours
Summer (15 Jun–15 Sep): 7:00–15:00
Rest of the year, Monday to Thursday: 8:00–17:00
Fridays and days before public holidays: 7:00–15:00
Getting hereOpens the map in a new tab