Request a quote
Customer's hall with an automatic electroplating line manufactured by Industrias Goini

01 · Surface treatment

Turnkey electroplating and surface treatment lines, tested before delivery

We design and manufacture the complete line in Álava (Basque Country) — tanks, structure, carriers, busbars, rectifiers, extraction and automation — and run it in full in our workshop before it travels to yours.

Line types

From manual lines to the most sophisticated automatic ones

Every line is designed for your part, your throughput and your building. Rack or barrel, and built in the material your chemistry demands.

We adapt to each customer's needs, designing and manufacturing everything from manual lines to the most sophisticated automatic lines on the market:

  • In-house automation, with PLC-HMI programming from leading brands
  • PC + SCADA, with management of articles and programmes and traceability of every process parameter
  • Industry 4.0
  • Remote assistance system

Rack or barrel?

Rack for large or delicate parts, or those with visible finish requirements: each part travels hanging. Barrel for small bulk parts: they tumble inside the barrel and are treated by the hundred or by the thousand. Many lines are mixed and combine both.

Materials to suit your chemistry

Tanks in PPH, PVC, GRP, PVDF, PVC-lined iron or stainless steel, and barrels and accessories in PP, PE or PVDF, depending on the product they must hold and the environment they work in. Our origin was plastic fabrication: we know which material withstands each bath.

3D model of a complete surface treatment line, designed by the Industrias Goini technical department
3D design before manufacturingEvery line is modelled part by part in CAD before the first material is cut.

Engineering

Conceptual, preliminary and detailed design

Once the customer's needs have been gathered, we follow a three-step design process: a conceptual design with the possible configurations, a preliminary design that optimises the chosen one, and a detailed design with simulations. Only then does manufacturing begin.

Finishes

The main processes in our lines

We adapt to the chemical process you use. These are the main treatments in the lines we have delivered, and we carry out others at the customer's request.

Degreasing
Nickel plating
Chrome plating: decorative and hard
Blackening
Electroless nickel
Zinc plating: acid, alkaline and zinc-nickel
Passivation
Anodising: hard, soft, TSA and sulphuric-boric
Pickling: stainless steel, titanium and iron
Penetrant inspection
Phosphating
Tin plating
Brass plating
Lacquering

Plastic metallisation

Lines for metallising and chrome plating ABS plastic parts, including chrome plating without hexavalent chromium.

Penetrant inspection

We integrate it into automatic lines, with the operator alerted to the inspections required.

Sectors

The main sectors our lines serve

Automotive
Aerospace
Locks and ironmongery
Taps, fittings and sanitaryware
Machining and metal structures
Bolts and fasteners
Electrical
Construction
Shipbuilding

Line components

Everything under one point of responsibility

The essentials come out of our mechanical and electrical workshop; commercial equipment — such as rectifiers — we select, size and integrate ourselves. That is why we can answer for the entire line. Click any photo to enlarge it.

Stainless steel tank with its valves and pipework
Process tanks Made to the size of your part, stiffened against deformation; with lagging, overflows and valves according to the needs of each tank.
Blue modular structure of a surface treatment line with its walkways and yellow stairs, assembled in a hall
Structures and walkways Modular, in degreased steel section painted with acid-resistant epoxy, with a removable non-slip grating walkway.
Yellow gantry carriers on a line under assembly
Carriers Gantry or side-mounted, in carbon and stainless steel, with variable speed and ramps, absolute-encoder positioning and automatic drip trays.
Stainless steel bars and contact frames for the racks
Contact bars and busbars Copper strip sized for the current each bath requires, from the rectifier to the tank.
Row of rectifiers beside an automatic line
Rectifiers High-frequency electronic units, sized to what each bath needs, controlled from the PLC and air- or water-cooled.
Automatic line seen from the walkway, with the tanks and their extraction hoods
Tank extraction PVC or PP hoods depending on the gas, with a flow-regulating valve, which carry the fumes to their gas treatment.
Drying oven with gas burner and its electrical panel
Drying Hot-air drying cyclone —electric, steam or gas-burner— recirculated through the drying tanks, so the part leaves the line dry.
Polypropylene tank with its copper busbars
Plastic fabrication Our original trade since 1980: PP, PVC and PVDF welded in our workshop.

Process equipment

What keeps each bath at its best

Bath filtration equipment with its pumps, beside the copper busbars and extraction of an electroplating line
Bath filtrationFilters with their pump beside the tanks, on a line delivered by Goini.

Filtration, agitation and dosing

  • Plate, pleated-cartridge or bag filters, in materials suited to the chemistry of each bath
  • Air agitation, with blower and coils
  • Mechanical agitation: vertical, horizontal, 2D or 3D rack movement
  • Eductor agitation, with diffusers on branch pipes
  • Dosing with metering pumps controlled by the PLC: by time, by load or by ampere-hours

Heating

  • Electric
  • Superheated water
  • Steam
  • Thermal fluid
  • Direct gas-fired induction

Drying and centrifuges

Electric, steam or gas drying cycle for racked parts, and hot-air centrifuges for small parts.

Loading, unloading and transfer

Fixed or mobile loading and unloading with height-adjustable trolleys, or automatic, designed so the operator works comfortably on the racks. If you have more than one line, a transfer carrier links them by dry or wet route.

Automation and control

In-house automation, from the carrier to the control desk

We integrate our own automation and electrical design to put together the electrical documentation best suited to each line.

  • We manufacture the electrical panels, the junction boxes and the cable runs.
  • We carry out the programming, from the simplest to the most sophisticated, through PLC-HMI-PC: control of every line parameter and data logging, geared to Industry 4.0.
  • And with online assistance we support you from Álava.
Control desk with screens and push-button panel for a surface treatment line, manufactured by Goini
Control desk Process screens and push-button panel of a Goini line.

Delivered lines

This is how our assembled lines look

Real photographs of lines manufactured by Goini. Click any of them to enlarge it.

Automatic line with red carriers being assembled in the Goini workshop
Automatic line seen from above, with blue structure and yellow walkways over the tanks
Blue modular structure of a line with its walkways and yellow stairs
White structure of an automatic line being assembled, with its orange carrier
Automatic line with blue structure, yellow walkway and its equipment at line side
Blue and orange structure of a line being assembled in the Goini workshop
Barrel line with red carriers in the Goini workshop, with an operator at work
White and blue process booths of a penetrant testing line
Aisle between the tanks of a barrel line, with the barrel motors
Long line with red carriers above the row of tanks
Automatic line with black tanks and access stairs to the walkway
Line under assembly with its control desk in the foreground

Speciality

Penetrant testing lines

Penetrant inspection lines for detecting discontinuities in critical parts: fluorescent or visible, post-emulsifiable or water-washable.

We automate the process, with intermediate stops and an alert to the operator for the checks the standard requires. And we integrate the penetrant testing line with the cleaning line, in tank-based or booth-based processes.

  • Penetrant application by immersion or electrostatic spraying
  • Removal of excess penetrant by automatic spraying at a set pressure
  • Developing with dry powder, by fluidisation or by electrostatic spraying
  • Inspection booths with ultraviolet light and extraction
Penetrant testing line with its black booths under the yellow walkway
Penetrant testing lineProcess booths under the walkway and carrier above, on a line delivered by Goini.
Automatic tank cleaning line and booth penetrant inspection line, manufactured by Goini
Cleaning and inspection, in the same installationTank cleaning line and booth inspection line, automatic: all integrated in the same installation.
White and blue process booths of a penetrant testing line
Process boothsApplication, developing and inspection, each in its own booth.

Step by step

This is how a turnkey line is delivered

Two real assemblies, photo by photo: a line built and tested in our hall in Álava, and another one erected afresh in a customer's hall.

In our hall in Álava From the empty hall to the complete line, assembled and tested before it leaves.
At the customer's plant The structure is erected again and the tanks and equipment arrive.
01

Manufacturing and testing

The line is manufactured and assembled complete in Álava, and tested in operation.

02

Dismantling and transport

Every element is dismantled and marked, and travels to your plant.

03

Assembly at your plant

Our team erects it again in your hall.

04

Start-up and training

We start it up with you and train your staff to operate and maintain it.

No-obligation quote

Define your line with our technical office

Process, part, throughput, available space…: with that information we propose the right line — automatic or manual, rack or barrel — with a turnkey quote.

Request a quote or call: 945 465 470