Request a quote
Batch physico-chemical treatment plant with filter press, installed at a customer's plant

02 · Water treatment

Industrial wastewater treatment: the water leaves clean.

Turnkey physico-chemical treatment plants for industrial effluents — designed case by case to meet your discharge permit, manufactured in Álava (Basque Country) and tested in full before delivery.

Plant types

Continuous or batch? We build both

It depends on your flow rate, your space and your process. We study it with you on your real analysis — and tell you which one suits you, not which one suits us to sell.

Continuous treatment plant

The water flows continuously through the plant, receiving each treatment as it passes.

  • For high, steady flow rates
  • High-surface lamella clarifier
  • Automatic reagent dosing
  • PLC control with parameter logging and remote assistance

Batch treatment plant

The water is treated in batches: filling, reaction, settling and emptying in the same reactor.

  • For variable or intermittent flow rates
  • Control at every step
  • Automatic, semi-automatic or manual

How it works

Physico-chemical treatment, in 6 steps

It is the heart of every treatment plant: destabilising the contaminants, grouping them, separating them from the water and bringing the pH to the permitted discharge values.

01

Coagulation and neutralisation

The water receives the reagents needed to group and separate the particles present, making their later removal easier. The pH is regulated in a controlled way to ensure optimal process conditions.

02

Flocculation

The particles are grouped using a flocculant, forming larger flocs that make settling and separation easier.

03

Settling

The flocs are separated from the water by a lamella clarifier, promoting fast settling and producing clarified water.

04

Sludge

The sludge drawn off is thickened and dewatered by a filter press, giving a solid residue that is easy to handle and ready for final disposal.

05

Final adjustment

If necessary, the pH is adjusted in a controlled way before discharge, to the legal discharge parameters.

06

Filtration of the treated water

Before discharge, the water passes through a sand filter that acts as a safety stage, retaining any traces of sludge and ensuring higher quality of the treated water.

04 · Water generation

We generate the water your line needs

We don't just treat wastewater, we also optimise the incoming water. Using ion exchange resins and reverse osmosis, we obtain high-quality water for rinsing the parts.

Demineralised water by resins

The resins replace the ions dissolved in the water with others held in the resin and regenerate automatically when saturated.

Reverse osmosis

Filtration through a semipermeable membrane at a pressure above the osmotic pressure. It gives two streams: the clean permeate, which supplies the rinsing of the parts, and the reject, which can be discharged straight to the drain or to a tank to be reused for other functions. Importantly: it requires no aggressive reagents and generates no waste to treat or manage.

Equipment

Manufactured and tested in our workshop

Like all our installations: the treatment plant is assembled complete in Álava, tested, and only then travels to your plant. Click any photo to enlarge it.

Batch plant with reactor, filter press and walkway, installed at a customer's site
Batch plant Reactor, filter press, dosing and panel: the whole plant.
Continuous treatment plant with yellow walkway and reagent tanks, assembled in the workshop
Continuous plant The complete set: reaction module, clarifier and filter press, all in the same plant.
Filter press on a red structure with stairs, assembled in the workshop
Filter press Sludge dewatering: compact cake ready for the waste manager.
Neutralisation module with agitator and pH measurement, in operation
Neutralisation module With agitator, pH and redox measurement, and overflows and cascades.
Lamella clarifier with conical bottom on a blue structure
Lamella clarifier Continuous, with plastic lamellae and a conical bottom for sludge purging.
Filters and pumps of a treatment plant, with their automatic valves
Filtration Through sand and activated carbon, with automatic valves for backwashing.
Lime slurry preparation unit for reagent dosing
Reagents With agitator, lime preparation unit and adjustable pumps.
Concentrate treatment plant with storage tanks and pumps
Concentrate treatment Storage tanks, level control and pumps.

From the archive equipment from previous installations

Regulations

Designed for your discharge permit

Each plant to its own standard

No two discharge permits are alike: each treatment plant is sized for the specific limits of your permit — metals, pH, COD, flow rate — and our laboratory verifies the process with your real analysis before manufacturing. Laboratory trials are possible.

Specific treatments

Effluents with hexavalent chromium, cyanides or other special contaminants require specific preliminary stages. We design them and integrate them into the same plant.

References

More than 70 treatment plants delivered since 1994

For anodising, zinc plating, chrome plating, nickel plating, phosphating, blackening or printed circuit boards: each one sized for the discharge of its line, in Spain as well as in Mexico and other countries.

From the workshop to your plant treatment plants from our references

The complete installation

Your effluent comes from a line. We build that too

We solve the line, its water and its air under one roof: everything comes out of the same workshop, designed to fit together, with a single point of responsibility.

No-obligation quote

Send us your effluent analysis

With the analysis and the flow rate, our chemical department sizes the right plant — continuous or batch — and we quote it to you turnkey.

Request a quote or call: 945 465 470